Replica of Existing
Replica of Existing
Get In Touch About This Door
Case Studies
Hand Finished in the UK from Solid Brass.
Product Dimensions – See Specification Sheet Below.
Price is Per Pair (2x Lever Handles, 2x Rose, Spindle and Fixings).
Other Bespoke finishes are available.
Your new door can be created as a single or double set and with glazed panels within the door, side panels or a fan light. The glazing can include lettering or numbering, and come in either clear, opaque or one-way mirror glass. The glass is a triple glazed security glass, 44mm thick.
The cross sections show how each beading profile looks on a flat panel or a raised panel. These beading types can also be used on glazed doors in any of our other collections too. Our sales team will be happy to assist you in knowing which beading and panel types are best suited to specific door models. Bespoke beading profiles are available upon request.
Constructed with a secure fire rated core, a rebated frame and selected quality ironmongery, our PAS24 doors are perfect for internal use where enhanced protection is required such as an apartment entrance door.
These are available in a finish of your choice, 33dB acoustic reduction and FD30 fire performance. PAS24 door sets will be supplied pre-hung in a 40mm rebated door frame. The following door furniture will be included; x2 pairs of stainless-steel hinges, a multi-point locking system, a euro profile key escutcheon, key-thumb cylinder, a bat wing smoke seal around the door frame and a drop-down seal. Additional door furniture/accessories such as handles, door closers (concealed or visible), spyholes, letterboxes etc are not included and will carry additional charges.
We have also tested with motorized electric multipoint locks that will enable you to open the doors with bluetooth technology which will include a smart phone.
The range of door designs SWD can offer will be up to 2500 in height and cam have panelled designs flush doors with grooves or inlays. Also the multipoint lock we use can accommodate handles in any finish or even no handles if required. You won’t need to use an unsightly multi-point security handle with our PAS24 door sets.
All doors from SWD are made to order which enables us to offer a huge range of glazing options. Some of the more popular options are shown here. Most of the glazing options can also be produced as a fire rated door. The types of glass available are: Clear toughened (Non-fire) / Opaque (Non-fire) / Bevelled (Non-fire) / Fire rated clear (FD30/
FD60) / Fire rated sandblasted (FD30/FD60). Your glazed doors will need beading to hold the glass in place.
All doors from SWD are made to order which enables us to offer a huge range of glazing options. Some of the more popular options are shown here. Most of the glazing options can also be produced as a fire rated door. The types of glass available are: Clear toughened (Non-fire) / Opaque (Non-fire) / Bevelled (Non-fire) / Fire rated clear (FD30/
FD60) / Fire rated sandblasted (FD30/FD60). Your glazed doors will need beading to hold the glass in place.
The below beading and panel profiles includes a range of traditional and contemporary options to suit any interior style. The cross sections show how each beading profile looks on a flat panel or a raised panel. These beading types can be used for our Classic Collection and may also be used on glazed doors in any of our other Collections too. Our sales team will be happy to assist you in knowing which beading and panel types are best suited to specific door models. Bespoke beading profiles are available upon request.
Our doors come with a multipoint locking system as standard, which can be upgraded to a motorised lock giving you the convenience of electronically opening your door with the use of either a fob reader, electronic keypad, fingerprint scanner or with a mobile app. The motorised lock can also be linked to your home control system.
As standard we supply a Level 3 security door which has 10 bolts between the door and frame, so it is very secure!
Upgrade to Level 4 security and your door will have 16 contact points between the door and frame, with the option to add bullet proof systems.
For our security conscious clientele, we offer further reassurance by upgrading to a bulletproof door, which can match existing decor or period finishes and features. We use engineered materials such as steel, glass and wood in various fabrications and in a variety of shapes and sizes to incorporate the design aesthetic into our client’s security solution whilst still ensuring an aesthetic look.
Considering adding a panic room to your property? A high security door is the perfect solution and can be used internally as well. Your door can be designed to suit specific requirements and can also be fitted with panels to match your interior doors so that the door does not stand out or look different. This level of protection and security provides complete peace of mind if you or your home is targeted by thieves, kidnappers or terrorists.
When purchasing new door sets, we can offer you a site survey which enables us to measure all of your openings and assess the exact requirements for a completely bespoke luxury service. Investing in a survey gives you absolute confidence that your doors are made to your exact specifications and eliminates scope for error and delay when installing. We also lend our experience and expertise to advise on solutions and options to meet any design requirements that you may desire.
If a site survey is not suitable, we can carry out a virtual site survey via video call or we can let you know the information we need and your builder can supply this instead.
Our standard door set frames are always rebated and made from moisture-resistant MDF, plywood or solid wood that can be supplied primed, wrapped in a matching veneer to the doors, or pre-finished in a lacquer or high gloss. As the frames are rebated and don’t require a plant on stop, we as standard install acoustic gaskets that can come in black, grey, brown and white depending on the colour of your frame. It will also include intumescent material if fire rated doors are required. The frames will come made to size based on your wall thicknesses; the maximum width of the frames are 175mm depending on the finish; if the walls are wider than this we would supply a reveal board in the same finish as the frame.
Our door sets include full casement architectural locks and latches along with x4 hinges per door as standard, all of which are machined into both the door and frame. As all the machining is done at our factories with C&C machinery, ironmongery as standard will be supplied with a radius edge providing a clean, neat finish. Instead of a radius edge, square edged ironmongery can be used and machined into your door sets if you prefer. There are three main locks
that we use with our door sets; a latch for non-locking doors, a bathroom lock fit for a handle and a thumb turn, and a euro profile sash lock fit for a handle and a cylinder for any doors you wish to be locked with
a key. Alternative ironmongery can be specified such as deep-set latches/locks which are specifically designed for mortice knobs as well as concealed hinges.
SWD can supply architrave and skirting profiles which can be veneered to match your doors and frames, resulting in a seamless and impressive look. The images below show some of the standard profiles available, however any of the profiles on the following page (102) are also available as an architrave either in MDF or solid wood, or as skirting. Both skirting and architraves can be made in different widths and thicknesses.
We can supply a huge variety of different architrave and skirting profiles, some of which are shown below. These can come in primed moisture resistant MDF or solid wood, for example walnut, oak, beech, tulip wood or Sapele. Plinth blocks and corner blocks are also available in various designs and sizes.
Acoustic doors create better spaces and privacy by giving each room the quiet to create your desired atmosphere and environment. Acoustics are measured in decibels; loud speech can read around 60 decibels, a vacuum cleaner can hit 70 decibels and a rock band
would be over 110 decibels.
Most manufacturers sell doors with a low acoustic rating of around 29 decibels. At SWD, our Lorient acoustic seals and drop-down seals have achieved soundproofing of up to 43 decibels. An acoustic rating of this level would make loud speech in the next room
muffled & incomprehensible.
Our flush contemporary doors are able to achieve the best ratings in soundproofing, and, fit in seamlessly to the wall for an unbeatably modern and stylish look. We have used these sleek designs in a recent project based in Dubai where the doors were 60mm thick and had rebates in both the door and frame, three acoustic seals and two drop down seals. These SWD state-of-the-art doors achieved an excellent acoustic rating of 43 decibels.
The system is made up of a split-type jamb produced from steel, which simply wraps around the end of a finished wall structure. Once fixed in place, the frame can be plastered over with the rest of the wall, giving an unbroken wall surface right up to the door and creating a seamless effect with the door being concealed with the wall.
There are two types of frameless doors. An inward opening door which is a rebated 54mm door and works with a floor spring and pivot, which is the ideal option if you are looking for a completely hidden door. The inward system will have the door flush with the wall and opening into a room – the external face of the door can therefore be cladded with various innovative options which can remarkably blend the door into a wall – SWD have carried out projects where our clients have used mirrors, various textured wall papers and leather panels.
The second type is the outward opening door which is flush with the wall on the outer side. This uses concealed hinges and the same metal frame system as above. This door will require something to open the door, typically a flush pull, so it is not a truly secret door. If a handle or flush pull is not required, a heavy duty magnetic push latch can be fitted. An overhead closer can be added.
This standard ironmongery list is included in the price of our doors.
Finishes available:
Please get in touch for more information.
This standard ironmongery list is included in the price of our doors.
Please get in touch for the different finishes available.
These are just a small selection of luxury options available, please get in touch for more information and to hear more about the finishes.
